Multifunctional Module Mouvon SCMF
|
Application Mouvon SCMF is a compact process data acquisition device in the range of process controller products. The module can be used as a LonWorks network integrated node as well as a stand-alone device. It is fully programmable and configurable via the network.
|
|
|
The module is designed specifically for multi-point temperature measurement, using proprietary temperature sensing probes, delivered by the company. In order to satisfy other control needs and compatibility with number of passive and active sensors, the SCMF provides versatile analog current and/or voltage inputs as well as analog current and/or voltage outputs. These features are built-in and selectable on command, or hardware configurable in situ. Additionally, the module provides electrically isolated digital inputs for steady or continuous entries and digital outputs to drive external Hi&Low voltage relays/lamps/ LEDs or TTL compatible inputs. Dedicated LEDs give visual information of inputs and outputs status and functionality. One modification of the basic configuration includes also a RTC, thus supporting real-time applications and tasks scheduling. SCMF possesses a built-in controller with PID regulation and a built-in Logic Interpreter.
Mouvon SCMF can be used in industrial and building (Heating, Ventilation, Air Conditioning, Refrigeration) process control systems, in "passive houses" and wide range of "green" technologies.
|
|
Technical specifications
General
- Product codes: Mouvon 16 TDA 47/17 (basic) ; Mouvon 16 TDA 47/17 RTC (built-in real time clock)
- Power requirements: Module : 10 -35VDC (non polarized) / 7 - 17VAC;
- Power consumption: Module only : 1,5W
- Protection grade: Housing & front panel - IP40
- Ambient operating & storage conditions: -40?C (-40?F) to +80?C (+176?F)10 to 95 % RH (non condensing)
- Power supply outputs: +5VDC / 100mA – for active sensors
Signal inputs
- Analog: 3 channels with common Zero (GND): each voltage or current ; 15 bits; scan rate – 850ms
- Voltage A_In 1 / 2 / 3 : Voltage in: each channel - 0 to +5V DC / +10V DC – software selectable; Rin=400 kOhm
- Current A_In 1 / 2 / 3 : Current in: each channel - 0 to +25mA DC; Rs = 200 Ohm, internal
- Digital: 16 channels; Pulse train, PW modulated
- Temperature : Method used: temperature-to-pulse width conversion; TTL compatible
- Channel 1-16: -40?C to +150?C; accuracy&resolution – 0,1?C after calibration; averaging possible
- Discrete : 2 channels; Low – (0 - +8)V / Hi – (+12 - +24)V; +/- reverse protected D_In 1 only – ON/OFF or "pulse_count" mode; D_In 2 – ON/OFF mode
Control outputs
- Analog: 2 channels with common Zero (GND): each voltage or current ; 12 bits;
- Voltage : Active voltage out: each channel - 0 to +10V DC ; RL=1 kOhm
- Current : Active current out: each channel - +2 to +25mA DC
- Digital: D_Out 1/2/3/4 – passive (external power supply required) ? +36VDC
- Outputs D_Out 1 / 2 / 3: I out ? 600mA ; no suppression diodes for inductive loads required
- Outputs D_Out 4: I out ? 300mA ; no suppression diodes for inductive loads required
LED indicators
Connections
CviLux System Power Connectors – Series CP35 (www.cvilux.com.tw )
P1 – 20 plug contacts (male); board mount header – CP35 20 P 1H00; Mates with CP35 20 S0010 P2 – 16 plug contacts (male); board mount header – CP35 16 P 1H00; Mates with CP35 16 S0010
Connector_P1 – 20pins_Upper
Green LEDs
|
ON
|
?
|
|
?
|
OFF
|
Green LEDs
|
T3
|
T2
|
T1
|
T0
|
|
|
|
|
|
T3
|
T2
|
T1
|
T0
|
? |
? |
? |
? |
T?_Chan – 16
|
19
|
|
20
|
T?_Chan – 1
|
?
|
?
|
?
|
?
|
? |
? |
? |
? |
T?_Chan – 15
|
17
|
|
18
|
T?_Chan – 2
|
?
|
?
|
?
|
?
|
? |
? |
? |
? |
T?_Chan – 14
|
15
|
|
16
|
T?_Chan – 3
|
?
|
?
|
?
|
?
|
? |
? |
? |
? |
T?_Chan – 13
|
13
|
|
14
|
T?_Chan – 4
|
?
|
? |
?
|
?
|
? |
? |
? |
? |
T?_Chan – 12
|
11
|
|
12
|
T?_Chan – 5
|
? |
? |
? |
? |
? |
? |
? |
? |
T?_Chan – 11
|
9
|
|
10
|
T?_Chan – 6
|
? |
? |
? |
? |
? |
? |
? |
? |
T?_Chan – 10
|
7
|
|
8
|
T?_Chan – 7
|
? |
? |
? |
? |
? |
? |
? |
? |
T?_Chan – 9
|
5
|
|
6
|
T?_Chan – 8
|
? |
? |
? |
? |
Temperature sensors_Power Supply - GND
|
3
|
|
4
|
Temperature sensors _ Power Supply - +5V
|
D_In 1
|
1
|
|
2
|
D_In 2
|
Rem: Pin_3 & Pin 4 – Power Supply Outputs ONLY for low power devices (+5V_regulated / ? 100mA) Pin 3 – PowerSupply GND – Power GND for Temperature sensors & Power GND for Digital Outputs 1-4 Pin 4 – PowerSupply +5VDC for Temperature sensors Pin 1 & 2 – 0 ? +24V (nom) Connector_P2 – 16pins_Lower
Connector_P2 – 16pins_Lower
D_In 1&2 Common GND
|
15
|
|
16
|
D_Out 1 – 4 Common +V(protect)
|
D_Out_1
|
13
|
|
14
|
D_Out_2
|
D_Out_3
|
11
|
|
12
|
D_Out_4
|
Analog I/O GND
|
9
|
|
10
|
Analog In_1 +5 ? +10V/ 0 ? 25 mA
|
Analog In_2 +5? +10V/ 0 ? 25 mA
|
7
|
|
8
|
Analog In_3 +5 ? +10V/ 0 ? 25 mA
|
Analog Out_1 +5 V / 0 ? 25 mA
|
5
|
|
6
|
Analog Out_2 +5 ? +10V/ 0 ? 25 mA
|
Module Power Supply 24VDC/17VAC
|
3
|
|
4
|
Module Power Supply 24VDC/17VAC
|
LonWorks_Net A
|
1
|
|
2
|
LonWorks_Net B
|
Rem: Voltage on Pin_16 ? + 50VDC (respect polarity)
|
Mounting
The module has been designed for a cabinet installation, on a standard DIN rail.
|
Dimensions
(W x H x D) 79 x 25 x 91 mm
|
|