|
Adjustable intelligent angular position sensor (90°) for harsh environment
(4-wire Version)
|
|
|
|
|
|
|
Technical data
- Power Supply: 24VDC (18V?36V).
- Analog Output: 4 ? 20mA (8bit); Rload<500W or 0?10V (8bit); Rin>100K.
- Digital Inputs: 2 Inputs (Dry Contact).
- Measuring Range: 0?90° (Adjustable).
- Principe of Measurement: Contact-less.
- Connection: by a 7-wire cable.
- Corpus: aluminium, non-rosted, non-magnetic screws and covers.
- Temperature Range: -20 ? 85°C.
- Protection: IP65.
|
|
Cable Connections
|
Red
|
+24VDC
|
|
Blue
|
-24VDC
|
|
Yellow
|
+Iout(4 – 20mA); + Uout(0 – 10V)
|
|
Green
|
-Iout(4 – 20mA); - Uout(0 – 10V)
|
|
Gray
|
Minimum-positioning Button (4mA); (0V)
|
|
Brown
|
Maximum-positioning Button (20mA); (10V)
|
|
White
|
Common Lead of the positioning Buttons
|
|
|
Calibration
- Connect the Sensor to the Power (The indicator will switch on).
- Put the controlled Axle into position “Minimum”, which will correspond to 4mA(0V). Fix the Minimum-Position connecting the Gray and White cables at least for a 1 sec.
- Put the controlled Axle into position “Maximum”, which will correspond to 20mA(10V). Fix the Maximum-Position connecting the Brown and White cables at least for a 1 sec.
- The Calibration is completed and the End -positions will be kept into the non-volatile memory.
- Remarks
- Please, don’t use magnetic materials near this device!
- Keep the magnet from mechanical damages!
- You have to pre-calibrate the sensor after a dismantlement
|
|
Sensor -Mounting and Magnet-Tuning
|
|
Dimensions (mm)
|
|
